Accessories for Cell Phone Repeaters

If you are already a happy owner of the mobile repeater but still need some extra parts or accessories, you will find every necessary detail on this page. Ordering additional accessories allows you to upgrade the whole equipment and adjust it to your personal needs. If you’re not sure which accessory to choose, contact our Support Managers for more information on repeater accessories.

If you haven’t purchased a mobile repeater yet and have some hesitation regarding the right model, our Search form is at your disposal. This is a convenient program that will select the appropriate repeater model automatically according to the inserted data.

​At MyAmplifiers you can order the following accessories:

Note: Cables exceeding in length those ones which are included into the kit may deteriorate the amplification ability of the repeater.

Indoor Antennas

NS-WA-3D

Indoor Whip Antenna NS-WA-3D

In order to effectively boost the signal inside a large location, you are likely to need extra indoor antenna. Designed for indoor application, The antenna features omnidirectional design, has 3dBi gain and distributes GSM, 3G and 4G signal within 698-960Mhz and 1710-2690Mhz frequency bands. The Ingress Protection Code is IP55. The antenna is offered with different connectors, SMA or N type. When placing an order please add the connector type in the comments. The antenna is normally used without cable.

$40
NS-CA-3D

Indoor Ceiling Antenna NS-CA-3D

The best solution to increasing the range of signal boosting is the extra antenna. It is an omnidirectional indoor antenna for ceiling mounting. It works in a frequency range of 698-960Mhz and 1710-2690Mhz, and is compatible with every GSM/ 3G/ 4G mobile repeater from Nikrans. The antenna gain equals 3dBi. The Ingress Protection Code is IP55.  A 5m cable is included.

$60
NS-IPA-8D

Indoor Panel Antenna NS-IPA-8D

Amplification of the low mobile signal can be easily performed with the help of the indoor panel antenna 8dbi. The Ingress Protection Code is IP55. This antenna works in a frequency range of within 698-960Mhz and 1710-2690Mhz bands. That allows to transmit all GSM/3G and 4G signals. It has directional design and is supposed to be mounted on the wall. Suits for all Nikrans repeaters.  Cable is included.

$75

Outdoor Antennas

NS-LPDA-12D

Outdoor Wide Band Yagi NS-LPDA-12D

It is a high-performance antenna intended for working with cellular networks. It is designed to be mounted on the wall and can ensure gains of up to 12 dBi. Works with 698~2700MHz. The Ingress Protection Code is IP55. A cable, as well as necessary mountings, is provided together with the antenna.

$115
NS-Boat-12D

Omni-Directional Boat Antenna NS-Boat-12D

This sensitive outdoor antenna for boats is able to catch even the lowest cell signal that can’t be found by your mobile devices. It is waterproof and lightweight and can be installed with any mobile phone signal booster for boats offered in our online catalogue. The antenna is sold together with a cable. The gain level is 12dBi. The Ingress Protection Code is IP55.

$115
NS-BY-9D

Outdoor Beautification Yagi Antenna NS-BY-9D

Designed specifically for outdoor use, the directional outdoor antenna is a professional solution to the low signal issue. It can work at GSM, 3G and 4G frequencies effectively boosting signals within 698-960 MHz and 1710-2690 MHz bands. The gain level of Yagi antenna is 9.5dBi. The Ingress Protection Code is IP55. Suits for all Nikrans booster models. A 10m cable is included.

$90
NS-OPA-8D

Outdoor Panel Antenna NS-OPA-8D

The outdoor panel antenna is one of the most powerful and effective antennas for amplification of the low mobile signal. Its gain equals 8dbi. The Ingress Protection Code is IP55. The uniqueness of this antenna consists in its Dual-Band mode that allows amplifying the signal both within 698-960 MHz and 1710-2690 MHz bands. This antenna has directional design. Suits for all Nikrans cell phone repeaters. A​ 10m​ cable is included.

$90

Splitters

NS-WS-2W

Two-Way Splitter NS-WS-2W

A two-way splitter is an irreplaceable accessory for you if your mobile repeater is meant for two or more rooms. It can operate at the frequency range of 698-960MHz and 1710-2690MHz providing all the house, office building or store with an improved signal. The Ingress Protection Code is IP55. 3m cable is included. Compatible with all Nikrans mobile repeaters.

$50
NS-WS-3W

Three-Way Splitter NS-WS-3W

So that to take maximum advantage of your powerful mobile repeater, you will need a splitter that distributes the improved signal to three or more different rooms. This option is widely used in stores, office buildings and private houses. This three-way splitter works in 698-960MHz and 1710-2690MHz frequency bands. The Ingress Protection Code is IP55. The splitter is delivered with 3 m cable.

$60
NS-WS-4W

Four-Way Splitter NS-WS-4W

The most effective splitter for a large location is a four-way splitter that permits distributing the signal to four different directions simultaneously. The supported frequency range is from 698-960MHz and 1710-2690MHz. The Ingress Protection Code is IP55. The kit contains 3 m cable. All cell phone repeaters from Nikrans can be used with this splitter.

$65

Cables, connectors and connector adapters

COAX3D-FB-5M

Cable for GSM, 5G, 4G and 3G COAX3D-FB-5M

It is a reliable coaxial cable that can be used with any of the GSM, 3G and/or 4G, 5G mobile signal boosters that are available on our website. We offer these cables of different lengths which makes it possible to choose the most appropriate variant. Please do not use too long cables for a booster as it can be a reason for lost signal power. The Ingress Protection Code is IP55.

$25
COAX7D-FB-10M

Cable for GSM, 5G, 4G and 3G COAX7D-FB-10M

This high-quality coaxial cable is a universal variant for different devices, including our mobile phone signal boosters for calls and mobile internet that work with GSM, 3G and/or 4G LTE, 5G networks. It is very important to use cables of an appropriate length to avoid the deterioration of the quality of the improved signal. On our website, you can order these cables of different lengths. The Ingress Protection Code is IP55.

$50
CNCTR-ADPTRS-Nm-SMAm

Connector adapters N-male to SMA-male

These connector adapters N-male to SMA-male ensure the simple installation of all the elements that can be included in a mobile signal booster kit of any type. These accessories for boosters are weather resistant which allows installing them even outdoors. Their high quality guarantees the possibility to minimize signal power losses. The Ingress Protection Code is IP55.

$10
CNCTR-ADPTRS-Nf-Nf

Connector adapter N-female to N-female

These connector adapters ensure the simple installation of all the elements that can be included in a mobile signal booster kit of any type. These accessories for boosters are weather resistant which allows installing them even outdoors. Their high quality guarantees the possibility to minimize signal power losses. The Ingress Protection Code is IP55.

$10
CNCTR-ADPTRS-Nf-SMAm

Connector adapter N-female to SMA-male

These connector adapters N-female to SMA-male ensure the simple installation of all the elements that can be included in a mobile signal booster kit of any type. These accessories for boosters are weather resistant which allows installing them even outdoors. Their high quality guarantees the possibility to minimize signal power losses. The Ingress Protection Code is IP55.

$10
CNCTR-ADPTRS-Nf-SMAf

Connector adapter N-female to SMA-female

These connector adapters N-female to SMA-female ensure the simple installation of all the elements that can be included in a mobile signal booster kit of any type. These accessories for boosters are weather resistant which allows installing them even outdoors. Their high quality guarantees the possibility to minimize signal power losses. The Ingress Protection Code is IP55.

$10
CNCTR-ADPTRS-Nm-Nm

Connector adapter N-male to N-male

These connector adapters N-male to N-male ensure the simple installation of all the elements that can be included in a mobile signal booster kit of any type. These accessories for boosters are weather resistant which allows installing them even outdoors. Their high quality guarantees the possibility to minimize signal power losses. The Ingress Protection Code is IP55.

$10
CNCTR-ADPTRS-Nm-SMAf

Connector adapter N-male to SMA-female

These connector adapters N-male to SMA-female ensure the simple installation of all the elements that can be included in a mobile signal booster kit of any type. These accessories for boosters are weather resistant which allows installing them even outdoors. Their high quality guarantees the possibility to minimize signal power losses. The Ingress Protection Code is IP55.

$10
CNCTR-3D

Connector for 3D-FB cable

You can buy a reliable connector that will help to prevent signal power losses ensuring excellent results of your booster’s work. The connectors offered in our catalogue are universal and can be used for joining elements of a wide range of different mobile phone signal booster models available on the market. The Ingress Protection Code is IP55.

$10
CNCTR-5D

Connector for 5D-FB cable

A reliable connector that will help to prevent signal power losses ensuring excellent results of your booster’s work. Universal and can be used for joining elements of a wide range of different mobile phone signal booster models available on the market. The Ingress Protection Code is IP55.

$10
CNCTR-7D

Connector for 7D-FB cable

You can buy a reliable connector that will help to prevent signal power losses ensuring excellent results of your booster’s work. The connectors offered in our catalogue are universal and can be used for joining elements of a wide range of different mobile phone signal booster models available on the market. The Ingress Protection Code is IP55.

$10
COAX5D-FB-5M-cable

5m Cable for GSM, 3G, 4G/ LTE, 5G COAX5D-FB-5M

This universal and high-quality coaxial cable has 5 meters of length. It suits for mounting amplifiers that work at 900MHz (GSM), 1800 MHz (DCS), 1900 MHz (PCS), 2100 MHz (3G), 4G LTE, 5G. The cable features 73 kg of tensile strength and 50 ohm of characteristic impedance. The Ingress Protection Code is IP55.

$25
COAX5D-FB-10M-cable

10m Cable for GSM, 5G, 4G and 3G COAX5D-FB-10M

This universal and high-quality coaxial cable has 10 meters of length. It suits for mounting amplifiers that work at 900MHz (GSM), 1800 MHz (DCS), 1900 MHz (PCS), 2100 MHz (3G), 4G LTE, 5G and with all Single, Dual Bands, TriBands or Multi Bands. The cable features 73 kg of tensile strength and 50 ohm of characteristic impedance. The Ingress Protection Code is IP55.

$40
COAX5D-FB-15M-cable

15m Cable for GSM, 5G, 4G and 3G COAX5D-FB-15M

Suitable both for indoor and outdoor application, this coaxial cable can be used with any booster at Myamplifier that work at standard frequency bands - GSM, 3G, 4G LTE, 5G. This cable has a 15-meter length and features excellent shielding effectiveness and insulation resistance. The Ingress Protection Code is IP55.

$60
COAX5D-FB-20M-cable

20m Cable for GSM, 5G, 4G/ LTE, 3G COAX5D-FB-20M

This cable is a physical foam coaxial cable that is mainly used for radio communication, broadcasting, network, etc. Its impedance is 50ohm. The Ingress Protection Code is IP55. And it is compatible with all our amplifiers that work at GSM, 3G/ 4G / 5G or several frequency bands. . It's recommended to use long cables only with advanced powerful boosters, not with the basic ones for better efficiency. 20m​ is also mostly used for outdoor application.

$65

Lightning protection

NS-LSP

Lightning Surge Protector NS-LSP

A lightning surge protector is a device designed to prevent the signal booster system from being damaged in the case if lightning strikes the outside antenna. If you live in a region prone to thunderstorms that will be a good idea to use a lightning protector between the outside antenna and the booster in order to protect it from a breakdown. A grounding wire is shipped with the device. The Ingress Protection Code is IP55. Read more on the installation tips of a lightning protector.
$40

Couplers

NS-CP-6D

5/6dB cavity coupler NS-CP-6D

This is 5/6dB cavity coupler for 698~2700MHz, N Female. This waterproof coupler with a coupling value of up to 6 dB helps to avoid mobile signal power losses in the process of signal transmission within a series of antennas. It is recommended to install this booster set accessory indoors. This coupler can be used with any other accessories as well as all GSM, 3G, 4G signal boosters that you can see on our website. The Ingress Protection Code is IP55.

$65
NS-CP-8D

7/8dB cavity coupler NS-CP-8D

This 7/8dB cavity coupler is for 698~2700MHz, N Female. This coupler is recommended to be used for installing GSM, 3G, 4G LTE mobile phone signal repeaters with a series of antennas. This element will help to avoid any power losses that can negatively influence the quality of the signal while it is being transmitted from one antenna to another. The coupling value is 7/8 dB. The Ingress Protection Code is IP55. The accessory is waterproof and is compatible with all the boosters that we offer.

$70
NS-CP-15D

10/15/20dB cavity coupler NS-CP-15D

A 10/15/20dB cavity coupler for 698~2700MHz, N Female, is suitable for being installed with any kind of mobile phone signal boosters, including repeaters intended for GSM, 3G and 4G LTE cellular networks. The accessory has a coupling value of up to 20 dB. It will help to minimize the risks of losing the signal power while the signal is being sent from one antenna to another within a series of antennas. The Ingress Protection Code is IP55.

$75

Power Adapters

NS-PS-5V

5V2A vehicle power supply NS-PS-5V

This 5V2A vehicle power supply is a lightweight and compact power supply that can be installed in vehicles of different types and sizes. It should be plugged directly into vehicle cigarette lighter and is compatible with the majority of modern devices designed for drivers including all GSM, 3G and 4G mobile phone signal boosters available on our website. The Ingress Protection Code is IP55.

$25
NS-PS-12V

24V/5V or 12V/5V power adapter NS-PS-12V

This 24V/5V or 12V/5V on your choice high-quality power adapter should be plugged into a wall outlet in order to convert 12V or 24V power from the outlet to 5V power needed for the safe and correct functioning of your booster. The power adapter can be compatible with all the cell phone signal repeaters available in the MyAmplifiers online catalogue. The Ingress Protection Code is IP55.

$35

Have a problem with cell phone signal? Let us take care of it for you

Your comfortable and stable mobile connection is only in one click away. Just let us know about your problem and get professional help

or simply contact us: contact@myamplifiers.com, +16178610605 (Sales), +(44)2045770585 (After-sales support), Sales Chat