The quality of our work has been enhanced after we managed to increase phone signal in our office.
Ruth Mazinais (Latvia)
For some years we used to be satisfied with it but our business center has grown significantly, a number of new companies has appeared there and we have begun noticing some serious Tele2 signal problems. I can’t say that our office is located in the area of Tele 2 poor coverage but as we believe Tele2 signal issues are a result of some infrastructural peculiarities or overcrowdedness on the territory of our business center.
Together with my co-workers and managers we have taken a decision to install a mobile signal booster to increase phone signal in our office. We have read a lot of information on the internet about these devices and opted for LCD1200-GSM+4G booster. It perfectly meets our requirements as it is able not only to improve Tele2 GSM poor signal, it is also able to amplify 4G/LTE signal which is also a very important factor for us as many of our clients and partners prefer to communicate via social networks and mobile messengers. It took only a couple of days to receive our booster. And to install it we needed not more than 15 minutes. The difference could be noticed just immediately after the installment. And we are really very happy that we have purchased the booster to increase phone signal.
Mobile signal booster is a good device not only for families but also for businesses!
Featured Products
Customer Stories
It can boost cell phone signal at home very well. I left my Mobilis signal problems behind.
Théo Wejieme (New Caledonia, Dumbéa)
This is a plug and play device, however you have to make sure you aim the outside antenna properly. The instructions are very simple, but in fact they are really not needed. After installing and orienting the outside antenna in the proper direction I rarely have interrupted calls. I have finally overcome the issue of Mobilis poor signal.
The model has a number of important features, such as shut-off function which prevents the device from errors and incorrect work, automatic and manual gain control which can be used upon your choice in order to manage the strength of the incoming signal. For avoiding network interference, the repeater is equipped with an automatic level control function to keep control of output signal. I think that this device is a great solution to any kind of mobile signal problems.
Mobile signal problems in our amusement center were resolved with a network booster for mobile.
Paolo Strollo (Italy, Trento)
I work at an amusement center that is located on a large surface, and our pervious signal amplifier from another store wasn’t working so well lately. Our visitors were complaining that internet signal was pretty unstable, they couldn’t get a proper connection, and sometimes there was no connection at all. We decided that we needed another, new and more powerful amplifier for our poor coverage.
With any questions about phone booster signal and ways to stop Mascom signal problems, contact MyAmplifiers!
Azuel Ntshebe (Botswana, Gaborone)
The device has two LCD screens where the main data (signal level, errors, setup information) is displayed. Due to Auto Gain Control & Auto Level Control function you don’t have to adjust the booster manually, this process in automatic, which is undoubtedly a great advantage. As soon as you stop using the phone the repeater passes into sleep mode, thus it automatically saves energy. And these are only a few of pluses the booster has.
